Madison Company offers a complete line of standard and advanced ultrasonic level measurement sensors for liquids. These products continue to meet demanding applications in many markets, at competitive prices.
In addition, Madison Company has the engineering capabilities to design these sensors for your specific non-contact level measurement needs, providing unique considerations for materials to be measured, vessel configuration and system interfacing. The microprocessor-based circuits provide a temperature-compensated signal for improved accuracy. All models have the ability to filter false echoes produced by peripheral obstructions. Continuous level measurement can be provided in a range of 0.33' to 90' (0.10m to 27.4m)with several power and programmability options. Point level can also be obtained using a Madison panel meter or PLC (Programmable Logic Controller).
Go to our Resource Center to view more Non-Contact Level Sensors reference information.
|Power Options||AC: 115 VAC, 60 Hz or 230 VAC, 50 Hz (± 20%) 1.7 VA
DC: 12 to 30 VDC, 0.07 Amps max. @ 24 VDC
R load = (Vs–6)/24 mA
|Output||4-20 mA or 20-4 mA, 6.1 uA resolution; 750 ohms (isolated on 4-wire models only)
Optional RS232 or RS485 communications port
|Fuse||0.125 Amps/250 V type 2AG|
|Accuracy||±0.25% of max. target range (in air)|
|Beam Angle||6-12 degrees at -3 dB (model dependent)|
|Loss of Echo Hold||1 minute (programmable 1-4 min.), 22 mA or 2 mA current output|
|Temperature Compensation||Onboard the sensor|
|Calibration||Push-button or optional programmable|
|Diagnostics (Echo Profile)||Via optional programmable port|
|Dead Zone Range||Model dependent or engineered to minimum|
|Operating Temperature Range||-40°F to 140°F (-40°C to 60°C)|
|Pressure||1 BAR (15 PSIG max.)|
|Approval||Entela, CE (in aluminum enclosure)|
|Conduit Entry||1/2" NPT hole (PVC only)|
|Ingress Protection||NEMA 4X (IP65)|
|Mounting Options||Swivel socket (cold-rolled steel); PVC flange with 3"-8 or 6"-8 NPT thread|
Various housing materials (may affect approval)
Ball coupler with 3" NPT thread for mounting and easy beam alignment