$125 Order Minimum Total Required!
These kits provide the user with the opportunity to optimize their own multi-point switches and fabricate them in the field from the kit components. The standard ML4444 kits are furnished with two floats and a 2" pipe plug. Maximum stem length is 43" (1092mm). Includes 1 - 9" fitting and stem, 2 - 12" extension tubes, 2 - 4.5" switch capsules, 4 unions and an end cap. Users who require a 3rd or 4th level, can purchase adder kits to do so.
Assembly of Madison's Multi-Point Switch Kits generally involves the following steps: Lay out the supplied components in the configuration that your application requires. Determine the lengths of the Connecting Tubes and cut them accordingly; de-burr and smooth the sharp edges of the cut tubes prior to installation. Perform a trial assembly and, using a continuity indicator (light, buzzer, Ohm Meter, etc.), verify that the switch actuation levels (L1 and L2) are at the required levels and the switch action (Normally Open or Normally Closed) is correct for your application. When switch set-up is satisfactory, tighten the fittings and apply thread sealant to the pipe threads on the top fitting before installing the switch into your tank.
Adder kits are availabe as follows:
ML4444-LVL3 to add a 3rd level
ML4444-LVL4 to add a 4th level
ML4444-LVLS3&4 to add a 3rd and 4th level
Note: SPST = Single Pole, Single Throw
The selection for petroleum-based liquids, such as lubricating oils, gasoline and diesel fuels. Widely used in storage tanks of vehicles, generators, transmissions and hydraulic systems. Other common uses are for lubrication oils, fluid recovery, refining and fuel processing switch level indication.
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
|Type||Full-Size Multi-Point Switch Kit|
|Max. Temperature||221˚F (105ºC)|
|Fitting Type||2" NPT Pipe Plug (For External Mounting)|
|Max. Pressure||150 PSIG|
|Switch Rating||60 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||72", 22 AWG, Teflon Insulated (Standard)|
|AC Voltage||60 VA Nominal - 0.50 amps max. @ 120 VAC, ( 0.40 amps @ 240 VAC)|
|DC Voltage||60 W Nominal - 0.50 amps max @ 24 VDC, ( 0.20 amps @ 120VDC)|
|Minimum Order Quantity||1 Pcs.|
|Available Same Day||3 Pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477