$125 Order Minimum Total Required!
The M4548 Industrial Point Level Float Switch with 6.5 ft. (2 meter) cable, provides efficient and highly reliable level detection in open vessels, sumps and ponds, even where debris or other conditions may exist. The rigid molded float has an integral three-conductor cable and operates an SPDT microswitch that is located inside the float. As the float rises or falls about a horizontal location where the cable is anchored, the switch changes state from Normally Open or Normally Closed as the float swings up and down. The microswitch can be used to stop a pump, close a valve or actuate indicator alarms as required. This switch is best used for direct load control around a specific point.
The large rigid propylene float is chemically resistant and extremely durable for long service life and resistance to heat, oxidation, ozone and aging due to weather or application conditions. These tilt float switches are designed for wastewater or pond level control, or any application where conditions are challenging and smaller sensors can’t hold up.
Mounting & Installation
There are no specific installation concerns. However, the lead cable should be supported in an enclosed tank. Additionally, in an open tank, sump, or pond, it is advantageous to clip the lead cable to the side, especially if excessive turbulence is experienced.
|Contact Rating||8A at 250V (15A starting)|
|Operational SG||0.8 Min.|
|Standard Cable Length||6.5 ft. (2 m)|
|Stem & Float SG||0.7 to 1.3 g/cm³|
|Max. Temperature||158ºF (70ºC)|
|Cable Wetted Materials||PVC Jacket, EPDM Rubber seal|
|Float Wetted Material||Polypropylene|
|Wetted Material Weight||Polypropylene|
|Max. Submerged Depth||65 ft 20 m|
|Max. Working Pressure||1 bar|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477